Shrink Wrapping Machine Price in Bangladesh: Which Machine Suits Bottle or Carton Packing

Sleeve shrink wrapping machine and heat shrink tunnel bundling glass jars on a conveyor

A shrink wrapping machine price in Bangladesh depends first on which type you need: a manual sealer with a heat gun, a semi-automatic L-sealer with a shrink tunnel, or a sleeve wrapper that bundles bottles. After that, the price moves with the largest pack size the machine must take, the tunnel length and heating power, the conveyor and controls, and whether it runs on single-phase or three-phase power. For a small factory the short answer is: wrap single boxes with an L-sealer and POF film, and bundle 6, 12 or 24 bottles with a sleeve wrapper and thicker PE film. DE International sources both types from packaging-machine makers in China and delivers them door-to-door to Dhaka or Chattogram — ask us for a current quote built around your product size and output.

Sleeve shrink wrapping machine and heat shrink tunnel bundling glass jars on a conveyor
A sleeve wrapper feeding grouped glass jars into a heat shrink tunnel. Photo: Cpackengineering, Wikimedia Commons, CC BY-SA 4.0.

What does a shrink wrapping machine actually do?

Every shrink wrapper wraps the product loosely in film, seals it, then passes it through heat. The film was stretched during manufacture, so the heat makes it pull tight around the product. Sealing and heating can be done by hand, in one combined machine, or by two machines joined with a conveyor.

In Bangladeshi factories, shrink wrap usually does one of two jobs, and the job decides the machine:

  • Retail finish and tamper evidence on single items: soap, cosmetic and perfume boxes, tissue boxes, biscuit or chocolate gift packs. The buyer sees a tight, clear wrap and knows the box has not been opened.
  • Transit bundling of several units into one pack: water, juice and soft drink bottles, canned drinks, jars of pickle or honey. Here strength matters more than looks, because the bundle is lifted, loaded onto vans and stacked in shops.

One machine rarely does both jobs well, so decide which job is your main volume before asking for quotations.

Which type of shrink wrapping machine fits your product?

Machine typeHow it worksBest forUsual film
Manual L-bar sealer + heat gunOperator pulls film over the product, seals it with a heated bar, then shrinks it with a hand-held heat gunTrial batches, low daily output, odd-shaped itemsPOF centrefold
Chamber machine (sealer and shrink hood in one)Product is sealed, then the hood closes and hot air shrinks the film in the same unitSmall workshops with little floor spacePOF
Semi-automatic L-sealer + shrink tunnelOperator places the product, the L-shaped bar seals it, a conveyor carries it through a heated tunnelSoap, cosmetics, perfume and food gift boxes at steady outputPOF
Sleeve wrapper (web sealer) + tunnelGrouped bottles are pushed through a curtain of film; the ends stay open and shrink into round holes6, 12 or 24 packs of water, juice, soft drinks, cansPE
Automatic side sealer + tunnelContinuous side seal, so product length is not limited by the sealing barLong items and higher continuous outputPOF

The round openings (bullseyes) at the ends of a sleeve-wrapped bundle are not a defect — they are why a sleeve wrapper uses less film and runs faster on bottle lines.

How does the film choice change the result?

Most problems we see with shrink wrapping in small factories are film problems, not machine problems. The three common films behave very differently:

  • POF (polyolefin) is clear, strong for its thickness and seals cleanly. It is the usual choice for food and retail boxes and suits L-sealers and chamber machines.
  • PVC is often cheaper, but it gives off irritating, corrosive fumes when the hot bar cuts and seals it, so the room needs good ventilation. It also gets brittle over time, and many brands have moved away from it.
  • PE (polyethylene) is thicker and tougher. It is used for heavy bottle bundles because it can carry the weight. It needs more heat and stronger airflow to shrink, which is why a tunnel built for POF often leaves PE bundles loose and wrinkled.

Film is also your running cost — over the years you will spend more on film than on the machine. Find out which film widths you can buy reliably in Bangladesh and ask the factory to test the machine with that film; if local supply is uncertain, ship a starter stock with the machine. Store rolls away from direct sun and hot roofs, because film kept in heat can partly shrink on the roll.

What decides the shrink wrapping machine price?

Two machines that look alike in a photo can be priced very differently. These specifications move the price:

  • Sealing system: manual, semi-automatic or fully automatic, and whether the seal is made by a hot wire or a hot blade.
  • Maximum pack size: the sealing bar length and the tunnel opening (width and height). Measure your largest pack, not your best-selling one.
  • Tunnel length and heating power: a longer, more powerful tunnel lets the conveyor run faster while still shrinking the film fully.
  • Conveyor: roller or mesh belt, chosen to suit the base of your product so bottles do not topple and small boxes do not fall through.
  • Automation add-ons: an infeed that groups bottles into 3×2 or 4×3 packs, a photo-eye, PLC and touchscreen controls.
  • Build: stainless steel versus painted mild steel, and the brand of heating elements, motors and temperature controllers.
  • Freight: a tunnel is bulky but not very heavy, so shipping is charged on volume. You can estimate the cartons with the CBM calculator on decl.bd.

Because each of these changes the figure, we do not publish a fixed price list. Send us your product dimensions, pack format and target output, and ask us for a quote built around your needs.

What should a Bangladeshi factory check before ordering?

  • Power supply: Bangladesh uses 220 V single-phase and 400 V three-phase at 50 Hz. Larger tunnels normally need three-phase. Tell the factory exactly what your building has, and confirm the motors and controller are wired for 50 Hz.
  • Load-shedding: a tunnel needs warm-up time, and a power cut in the middle of a run leaves packs sitting in a hot tunnel. Ask how products are cleared after a cut, and plan backup power if outages are frequent at your site.
  • Heat and ventilation: the tunnel radiates heat. Keep it away from the filling area and give it airflow, especially with PVC film.
  • Spare parts: order a spare kit with the machine — sealing wire or blade, PTFE (Teflon) tape, silicone pads, a heating element and a temperature controller.
  • Customs classification: packing and wrapping machinery, including heat-shrink wrapping machinery, falls under HS heading 8422.40. Duty and VAT depend on the current tariff and your importer status, so confirm the rate with your C&F agent. Our guide to customs clearance for machinery imports explains the process.

How do you order a shrink wrapper from China without surprises?

  1. Send your product dimensions, photos and exact pack format (for example, six 500 ml bottles in a 3×2 group).
  2. State a realistic output per hour and your power supply; over-stating output only buys a bigger tunnel.
  3. Ask for a test video using your dimensions, or send real samples to China.
  4. Agree the film type and width in writing.
  5. Before packing, get a running video with the agreed film, or arrange a pre-shipment inspection.
  6. Make sure any wooden crate is heat-treated and marked under ISPM 15 for Chattogram.
  7. Ask for an English manual, the wiring diagram and a video call for first start-up.

Which mistakes cost small factories the most?

  • Buying a POF-only tunnel for PE bottle bundles. Bundles come out loose and wrinkled and tear when lifted; the fix is usually a new tunnel.
  • Sizing for today’s product only. Next year’s larger pack does not fit the sealing bar or tunnel opening.
  • Skipping spares. A sealing blade costs little, but waiting weeks for one stops the whole line. If it happens, air freight for emergency spare parts is the fastest way out.

If your line also needs filling, capping and labelling, read our guides to liquid and beverage filling machines and cartoning and end-of-line packaging, so the shrink wrapper matches the speed of the machines before it.

FAQ

Which shrink wrapping machine is best for a small water bottle factory in Bangladesh?
A sleeve wrapper with a tunnel designed for PE film. It bundles 6, 12 or 24 bottles with open ends, uses less film than a closed wrap and gives the strength needed for transport. Our guide on starting a bottled water business covers the rest of the line.

Can I use a heat gun instead of a shrink tunnel?
Yes, for low output or for trial batches. A heat gun works, but the finish depends on the operator, and it is slow. Once you wrap a steady number of packs every day, a tunnel gives a more even result.

What is the difference between shrink wrap and stretch wrap?
Shrink wrap is tightened by heat and is used on individual products and bundles. Stretch wrap is pulled tight by hand or a pallet wrapper with no heat, and is used to hold cartons together on a pallet.

Where can I buy a shrink wrapping machine in Bangladesh?
DE International sources L-sealers, chamber machines, sleeve wrappers and shrink tunnels from manufacturers in China, checks them before shipping and delivers door-to-door to your factory. Message us on WhatsApp at +880 1750-859967 with your product size and pack format for a quote.

Planning a packaging line? See our essential packaging and sealing machines for small factories, browse our services, use our China sourcing and buying agent service, check the shop, or contact us — WhatsApp +880 1750-859967.