A rice colour sorter is an optical machine that looks at every grain of milled rice with cameras and blows out the bad ones — yellow, chalky, black-tipped or red grains, leftover paddy, stones and glass — with a short jet of compressed air. A rice mill in Bangladesh needs one when buyers, superstores or exporters start rejecting lots for discoloured grains, or when hand-picking has become the slowest and most expensive step in the mill. The rice color sorter machine price in Bangladesh depends mainly on the number of chutes, the camera system and whether you also need the air compressor; DE International sources colour sorters from factories in China and delivers them door-to-door, so ask us for a quote built around your mill’s output.

How does a rice colour sorter actually work?
Milled rice goes into a hopper on top. A vibrating feeder spreads the grains onto inclined chutes, each divided into narrow channels (64 per chute is a common layout on Chinese models), so grains slide down in single-file streams.
As grains leave the chute they fall through an inspection zone lit by LED lamps. Cameras on both sides photograph every grain against a background plate, and the processor compares its colour with the limits set on the touch screen. If a grain falls outside the limit, an ejector valve fires a puff of compressed air that knocks that one grain into the reject outlet. Good grains carry on into the accept outlet.
Two practical points follow. The ejector valves need clean, dry, oil-free air, so a compressor, air tank, dryer and filters are part of the system, not extras. And mill dust settling on the camera glass makes every grain look darker, which is why most machines have automatic glass-cleaning brushes and why the sorter should not sit next to the husker or polisher outlet.
Which defects can a colour sorter remove from Bangladeshi rice?
Rice in Bangladesh comes in two very different forms, and the sorter has to be set up for the one you mill. Atap (non-parboiled) rice is white, so yellow or chalky grains stand out clearly. Parboiled (siddho) rice is naturally light amber, so the sorter program must be calibrated on your own parboiled rice or it will reject good grains as “yellow”. Always send the factory a sample of your actual rice for a test run before you buy.
| Defect | Where it comes from | Can a colour sorter remove it? |
|---|---|---|
| Yellow or fermented grains | Paddy stored wet or dried late after harvest | Yes — the main job of most rice sorters |
| Chalky (white-belly) grains | Immature grain or heat stress in the field | Yes on most machines, with careful sensitivity settings |
| Black or brown tipped grains | Insect damage, fungal spots, burnt grains from the dryer | Yes |
| Red or red-striped grains | Mixed varieties, wild rice in the field | Yes |
| Unhusked paddy grains | Incomplete husking | Yes, they show as a different colour |
| Small stones, glass, plastic | Drying yards, sacks, handling | Usually yes; a destoner before the sorter is still needed |
| Broken grains | Milling and polishing | No — that is the job of a length grader or sifter; some sorters add shape sorting |
The last row matters: a standard colour sorter judges colour, not length, so brokens are separated by a grader (rotary sifter or indented cylinder) before it. Some newer models add shape sorting; if brokens matter, ask for a test video on your own rice.
Where does the sorter go in a rice mill line?
In a typical automatic rice mill the order is: pre-cleaner and destoner, husker, paddy separator, whitener, polisher, length grader, colour sorter, then weighing and packing. The sorter sits near the end because polishing changes how grains look, so it should see finished rice.
Larger mills often sort in two passes: the reject stream from the first pass still holds good grains, so it is re-sorted to recover them. The share of good grains lost to the reject outlet is called the carry-over ratio, and it is where money quietly leaks — an over-aggressive sorter turns saleable rice into cheap feed. Our rice mill machine guide explains the full line.
When does a rice mill in Bangladesh actually need one?
Not every mill needs a sorter on day one. It usually pays its way when:
- You sell packed, branded rice. Superstores judge rice by eye; miniket or nazirshail with visible yellow grains sells at a discount or is rejected.
- You mill aromatic rice. In chinigura and kalijira even a few discoloured grains are obvious, and the price gap between grades is wide.
- You depend on hand-pickers. A sorter frees the team picking over rice on mats and runs at a steady speed every shift.
- Your paddy quality varies. In a wet boro or aman season, slow drying raises the share of yellow grains; a sorter keeps your grade steady.
- You also process pulses or spices. With different programs the same machine sorts lentils, mustard and chickpeas. See our dal mill machine guide.
If you sell unbranded rice in bulk to wholesalers who do not pay more for a cleaner grade, a sorter may sit idle.
What decides the rice color sorter machine price in Bangladesh?
We do not publish a fixed price, because the landed cost changes with the model, the exchange rate and freight. These are the factors that move it:
| Factor | Why it changes the cost |
|---|---|
| Number of chutes | More chutes means more channels, cameras and ejectors, and higher hourly capacity. This is the biggest single driver. |
| Camera type | Basic sorters use simpler cameras; full-colour high-resolution cameras pick up faint yellowing and chalkiness better and cost more. |
| Sorting functions | Colour-only machines cost less than models that add shape or size sorting. |
| Ejector valves | Valve quality and count affect accuracy and how often you replace parts. |
| Air compressor and dryer | Some quotes include them, some do not. Compare quotes on the same basis. |
| Software and support | English interface, saved programs for different rice types and remote support access add value. |
| Freight, duty and clearance | Shipped in a wooden crate by sea; duty, VAT and C&F charges are added at Chattogram. |
A quote that looks cheaper often leaves out the compressor or spare valves, so compare quotes line by line.
How to buy and import a colour sorter from China, step by step
- Write down your hourly output after polishing, the rice types you mill (atap, parboiled, aromatic) and the defects you want removed.
- Send a few kilograms of your own rice to the factory for a sorting test, and ask for a video showing both the accept and reject outlets.
- Confirm the sorter and compressor match your supply (220V single-phase or 400V three-phase, 50Hz) and plan a voltage stabiliser, because sudden drops upset cameras and valves.
- Put a spare parts kit in the contract — ejector valves, lamps, filters, cleaning brushes.
- Arrange inspection before shipment. Our team can check the machine at the factory against the agreed specification; read how to verify a Chinese supplier before paying.
- Ship in a fumigated wooden crate (ISPM-15 marked). Colour sorters are commonly declared under HS heading 8437 (machines for cleaning, sorting or grading grain); confirm the exact code and current duty with your C&F agent before shipping.
- After delivery, have the sorter installed on a level base away from husker dust, connect clean dry air, and run calibration on your own rice before full production.
Common mistakes that waste a colour sorter
- Using the mill’s old workshop compressor. Wet, oily air ruins ejector valves.
- Feeding unpolished or dusty rice. Bran and dust coat the glass and confuse the cameras.
- Setting sensitivity too high. Check the reject outlet every shift; if it looks mostly good, lower the setting or add a second pass.
- Running parboiled rice on an atap program. The sorter throws out good amber grains.
- Expecting it to remove brokens. Keep the grader in the line.
FAQ
What is the price of a rice color sorter machine in Bangladesh?
It depends on the number of chutes, the camera system, whether a compressor is included, and freight and duty to your mill. Send DE International your hourly output and rice type and we will quote a landed price.
Can one colour sorter handle both parboiled and atap rice?
Yes, if it is calibrated separately for each. Save one program per rice type and switch programs when you change the rice being milled.
Does a colour sorter need an air compressor?
Yes. The ejectors use compressed air to blow out bad grains, so the sorter needs a compressor with an air dryer and filters to supply clean, dry air.
Who can import a rice colour sorter from China to Bangladesh for me?
DE International sources colour sorters from Chinese factories, arranges a sorting test on your own rice, inspects the machine and delivers it door-to-door to your mill. WhatsApp us on +880 1750-859967.
Next steps: see our services, the China sourcing and buying agent service and our machinery shop. If your paddy arrives wet, read our paddy dryer guide, since late drying is the main cause of yellow grains. For shipping costs to Chattogram or Dhaka, get a cargo quote from our logistics side at decl.bd, or contact us — WhatsApp +880 1750-859967.
