Power Loom Machine Price in Bangladesh: Which Loom Suits a Small Weaving Unit

Shuttle power loom weaving red striped cotton fabric in a small weaving shed

Power loom machine price in Bangladesh depends mainly on which type of loom you buy (shuttle, rapier, air-jet or water-jet), the reed width, whether you add a dobby or jacquard head, and how many looms you order together. For a small weaving unit in Narsingdi, Sirajganj, Tangail or Pabna, a rapier loom with a dobby is usually the most practical choice because it handles cotton, polyester and blended yarns, changes designs easily, and does not need the large compressor plant an air-jet shed needs. DE International sources power looms from Chinese factories and delivers them door-to-door to Bangladesh; ask us for a current quote built around your fabric, width and number of looms.

This guide explains how the four loom types differ, which one fits which kind of Bangladeshi weaving unit, what actually moves the price, and what to check before you pay a Chinese supplier.

Shuttle power loom weaving striped cotton fabric in a small weaving shed

Photo: Tarunsamanta / Wikimedia Commons, CC BY-SA 4.0.

Which power loom types can you buy from China

Every loom does the same three basic motions: shedding (lifting some warp threads to open a gap), picking (sending the weft yarn across) and beating up (pushing the new weft into the cloth with the reed). The loom types are named after how they do the picking, and that single difference decides speed, fabric range, noise, and what support equipment your shed needs.

Loom typeHow the weft crossesGood forWatch out for
Shuttle loomA wooden or plastic shuttle carrying a pirn is thrown acrossLungi, gamcha, simple cotton cloth, very low budget unitsSlow, loud, more weft breaks and shuttle wear; fewer Chinese factories still build them
Rapier loomRigid or flexible rapier arms carry the weft from both sidesShirting, sharee base cloth, home textiles, mixed yarns, frequent design changesRapier tapes and grippers are wear parts; keep spares
Air-jet loomCompressed air blows the weft through the shedHigh-volume plain or simple fabrics in long runsNeeds a large, clean, dry compressed-air supply and steady power
Water-jet loomA jet of water carries the weftPolyester and nylon filament fabricsOnly works with hydrophobic synthetic yarns; needs water treatment and drainage

Most first-time buyers in Bangladesh do not need the fastest loom. They need a loom that keeps running with the yarn they can actually buy locally, with spare parts they can get quickly, and with a mechanic in the shed who understands it.

Which loom suits a small weaving unit in Bangladesh

Start from the fabric, not the machine. Write down three things: the yarn (count and fibre), the finished cloth width, and how often the design changes. Then match it this way:

  • Cotton or blended cloth with regular design changes (checks, stripes, small dobby patterns for shirting or sharee base): a rapier loom with an electronic dobby is the usual answer. Design changes are a programme change rather than a lag-chain rebuild.
  • Large figured designs (bedcovers, upholstery, motif sharee): you need a jacquard head on top of a rapier loom. The jacquard is often priced and supplied separately, and the harness has to be built for your hook count and design repeat.
  • Polyester filament fabric in long runs: water-jet looms are cheap to run per metre but only if your yarn and water treatment suit them.
  • Plain grey cloth in very large volume: air-jet looms make sense only when you can also invest in the compressor, dryer and air piping, and when your power supply is stable.

A common mistake is buying a wide loom (for example a width meant for bedsheet fabric) when all your orders are for narrow cloth. The wider reed space costs more, takes more floor area and runs slower in picks per minute, so you pay twice for width you do not use. The opposite mistake, buying too narrow, locks you out of home-textile orders later. Choose the reed space for the widest fabric you realistically expect to weave in the next few years.

What decides the power loom price

Chinese suppliers quote very different figures for what looks like the same loom on Alibaba or 1688. The gap almost always comes from the specification lines below, so always compare quotes line by line rather than by the headline number.

Price factorWhy it changes the cost
Loom typeAir-jet and rapier looms carry more precision parts and electronics than shuttle looms
Reed space (width)A wider frame, longer rapier tape and heavier beam all add cost
Shedding deviceCam, mechanical dobby, electronic dobby and jacquard heads are priced very differently
Weft selector coloursMore weft colours need more feeders and selector fingers
Electronic let-off and take-upGives steadier pick density; cheaper looms use mechanical systems
Brand of key componentsControllers, servo motors and inverters from well-known brands cost more but are easier to service
Order quantityA batch of looms usually gets a better unit price and a shared technician visit
Spare parts kitSome quotes include grippers, tapes and heddles; others charge separately
Shipping, duty and installationSea freight, customs duty and VAT in Bangladesh, plus inland transport to your shed

We do not publish a fixed loom price, because the honest answer changes with each of these lines and with exchange rates. Send us your fabric and loom count and we will come back with a quote you can compare against your other offers.

Shed, power and preparation before the looms arrive

Looms are the visible part of a weaving unit, but many problems in Bangladeshi sheds come from what surrounds them:

  • Floor: looms vibrate continuously. A level, solid concrete floor with proper foundation bolts reduces breakdowns, noise and cracks in the building.
  • Power: modern rapier and air-jet looms run on three-phase supply with electronic controllers. Voltage swings during load-shedding and generator changeover damage inverters and boards, so plan stabilisers or protection from the start and size your generator for the looms you will add later.
  • Humidity: cotton yarn weaves best in a humid room. In the dry winter months in northern Bangladesh, warp breaks rise in an unhumidified shed. Simple humidification is cheaper than lost production.
  • Preparation: looms need warp beams. Decide whether you will buy sized beams from another mill or set up your own warping and sizing. Without good beams, even a new loom runs poorly. For the cutting, stitching and packing side of a home-textile unit, see our overview of textile and bedding production machines.

How importing a power loom from China works, step by step

  1. Specification sheet. Reed space, loom type, shedding device, number of weft colours, voltage and frequency (Bangladesh uses 50 Hz), and the yarn types you will run.
  2. Supplier shortlist and verification. Check that the company is a real loom manufacturer and not only a trading front. Our guide on how to verify a Chinese supplier before paying lists the checks.
  3. Video or factory test run. Ask to see your exact model weaving a fabric close to yours, at the speed they claim, before the deposit.
  4. Proforma invoice and payment terms. Machinery is often paid by LC for larger orders; see our LC guide.
  5. Pre-shipment inspection. Check the serial numbers, controller brand, accessories and spare kit against the contract before the crates are closed.
  6. Shipping and customs. Looms are heavy and are usually shipped by sea in crates. Clearance at Chattogram follows the normal machinery process explained in customs clearance for machinery imports. Confirm the current HS code and duty with your C&F agent, since rates change with each budget.
  7. Installation and training. Agree in writing who installs the looms, whether a technician travels to Bangladesh, and who pays the travel cost.

Common mistakes when buying power looms

  • Comparing only the loom price. Two quotes can differ because one includes a dobby, a spare kit and a technician visit and the other does not.
  • Ignoring wear parts. Rapier grippers, tapes, heddles and drop wires wear out. If you cannot get them in Bangladesh, a loom can stand idle for weeks waiting for a small part. Order a spare kit with the looms.
  • Buying the wrong voltage. A controller set for another country’s supply can fail on day one.
  • No trained mechanic. Electronic dobby and jacquard settings need someone who can read the controller menu. Send your mechanic to the training or ask for video training before shipment.

FAQ

What is the power loom machine price in Bangladesh?

It depends on loom type, reed width, shedding device, component brands and how many looms you order, plus freight, duty and installation. DE International gives a current quote once we know your fabric and quantity.

Which power loom is best for a small weaving factory in Bangladesh?

For most small units weaving cotton or blended cloth with changing designs, a rapier loom with an electronic dobby is the most flexible choice. Water-jet looms suit polyester filament fabric only.

Can I import second-hand power looms from China?

Yes, used looms are traded in China, but inspect the frame, gears, beam and electronics before paying, and confirm current rules for importing used machinery with your C&F agent.

Who can source power looms from China and deliver them to Bangladesh?

DE International finds and checks loom factories in China, arranges inspection and shipping, and delivers to your site in Bangladesh. Contact us on WhatsApp +880 1750-859967 or through our contact page.

Ready to plan your weaving unit? Send us your product, target output and site details through our contact page or WhatsApp +880 1750-859967. You can also see our import services, the China sourcing and buying agent service, and machines already listed in our shop.