Blister Packing Machine Price in Bangladesh: Choosing a Machine for Pharma, Toys or Hardware

Tablets and capsules sealed in aluminium and PVC blister packs

The right blister packing machine for a Bangladeshi business depends first on what you pack: tablets and capsules need a thermoforming Alu-PVC or cold-forming Alu-Alu machine built to pharmaceutical standards, while toys, hardware, batteries and cosmetics usually need a much simpler blister-on-card or clamshell sealing machine. The price of a blister packing machine in Bangladesh is decided by the machine type (flat-plate or roller), forming width and speed, how many sets of moulds you need, the feeder, and how much validation paperwork comes with it. DE International sources blister packing machines and their moulds from factories in China and delivers them door-to-door to Dhaka, Gazipur, Savar or Chattogram — ask us for a quote based on your product and blister size.

Tablets and capsules sealed in aluminium and PVC blister packs

Which type of blister packing machine do you actually need

Start by placing your product in one of these groups:

  • Flat-plate thermoforming (Alu-PVC). A PVC or PVDC-coated film is heated and formed into pockets by flat plates, the product drops in, aluminium lidding foil is heat-sealed on top, and the strip is cut out. Chinese factories often sell these under DPP model names. This is the most common choice for small and mid-size pharmaceutical, nutraceutical and herbal tablet packers.
  • Roller (rotary) type. Forming and sealing are done by rotating rollers instead of flat plates, which allows continuous motion and higher output. It suits large pharma lines with long runs of the same pack.
  • Cold forming (Alu-Alu). Laminated aluminium foil is stretched into pockets without heat. Alu-Alu gives a stronger moisture and light barrier, which matters for moisture-sensitive drugs in a humid climate like Bangladesh, but the pockets are larger for the same tablet.
  • Blister-on-card and clamshell sealers. A pre-formed plastic blister is placed on a printed paper card and heat-sealed, or two halves of a clamshell are sealed together. Used for toys, hardware, phone accessories, batteries and stationery sold on hooks in shops.

Pharma blister machine or consumer-goods blister sealer: how they compare

PointPharma Alu-PVC or Alu-Alu machineCard blister or clamshell sealer
ProductsTablets, capsules, softgels, lozengesToys, tools, hardware, accessories, cosmetics
Forms its own pocketsYes, from film or foil on the machineNo, uses pre-formed blisters bought separately
Contact partsStainless steel, cleanable, GMP designStandard industrial build
Batch number and expiryEmbossing or printing station on the machineUsually printed on the card beforehand
DocumentationValidation documents expected by regulators and auditorsNormal manual and electrical diagrams
Change of product sizeNew mould set for each blister layoutNew sealing plate or fixture per card size

What decides the price of a blister packing machine

We do not quote fixed prices on this page because the final cost depends on your blister layout and the documentation you need, and freight and duty sit on top of the factory price. These are the factors to compare between quotations:

Price factorWhat to ask the supplier
Machine typeFlat-plate, roller or combined? Alu-PVC only, or convertible to Alu-Alu?
Forming width and depthMaximum film width and pocket depth decide how large a tablet or capsule the machine can take.
SpeedAsk for the speed in blisters per minute for your actual layout, not the brochure maximum.
Moulds and change partsHow many mould sets are included? Each extra blister size needs its own forming, sealing and cutting tooling.
FeederUniversal brush feeder, or a dedicated feeder for capsules and odd-shaped tablets?
CodingEmbossing station for batch number, manufacturing and expiry date, or an inkjet printer?
Material of constructionGrade of stainless steel on product-contact parts, and whether surfaces are easy to clean.
Validation packageAre DQ, IQ and OQ documents, material certificates and a factory acceptance test included?
UtilitiesVoltage, compressed air, and whether a chiller or cooling water is needed for the moulds.

Moulds are where many buyers get surprised. A machine quoted with one mould set can only pack one blister layout. If you pack a round tablet in strips of ten and an oblong capsule in strips of six, you need two sets — and each set is designed from your real product samples.

Pharmaceutical buyers: GMP and DGDA points to check

Medicine manufacturing in Bangladesh is regulated by the Directorate General of Drug Administration (DGDA), and pharma plants are expected to follow Good Manufacturing Practice. A blister machine for a licensed pharma, Unani or Ayurvedic plant should therefore be chosen with the inspection in mind, not only the price. Check these before ordering:

  • Product-contact parts are stainless steel or another approved material, with smooth welds and no hidden corners where powder collects.
  • The machine can be cleaned between batches without full disassembly, and the factory supplies a cleaning procedure.
  • Material certificates for contact parts, an operating manual in English and electrical drawings are part of the delivery.
  • Qualification documents (design, installation and operational qualification) are available, so your QA team can complete performance qualification on site.

Rules and inspection practice change, so confirm current requirements with your own QA department or regulatory consultant before you finalise the machine. Our guide to an herbal medicine and supplement processing line covers the machines that come before blister packing.

Packing materials: PVC, PVDC, Alu-Alu and lidding foil

The machine is only half the package. A plain PVC blister is clear and economical but lets moisture through over time; PVDC-coated PVC improves the moisture barrier; Alu-Alu blocks moisture and light almost completely. The lidding foil must have a heat-seal lacquer that matches the forming film, and it is usually printed with the product name and pack details. Bangladesh’s monsoon humidity is a real factor here — a hygroscopic tablet that is stable in Alu-Alu may soften in plain PVC. Choose the material with your formulation team first, then make sure the machine can run it.

For consumer goods, the blister and printed card are usually bought from a packaging supplier, and the card’s heat-seal coating must match the blister plastic. A mismatch is the most common reason card blisters peel open on a shop hook. Consumer packs sold in Bangladesh also need correct retail labelling — see our note on labelling requirements for packaged goods.

How to import a blister packing machine from China to Bangladesh

  • Prepare samples and a layout. Send product samples, the number of units per strip and the strip size you want, plus the film and foil you plan to use.
  • Approve the mould drawing. The factory draws the blister layout; check pocket size and spacing before tooling is made.
  • Factory acceptance test. Ask for a run on your own samples with your packing material, recorded on video, before paying the balance. DE International can attend in person in China.
  • Documents and HS code. Packing machinery is generally classified under heading 8422; confirm the exact code and current duty with your C&F agent. Make sure the commercial invoice describes the machine and the moulds clearly.
  • Shipping. Most blister machines travel by sea in a wooden crate with ISPM 15 treatment. You can request a freight estimate from decl.bd.
  • Installation and qualification. Plan power, air and space, then run trials and complete your documentation before commercial production.

Common mistakes when buying a blister machine

  • Ordering without real samples. The pockets do not fit the product, tablets break in the feeder, and new moulds must be made.
  • Buying only one mould set. The machine sits idle as soon as a second product size is needed.
  • Choosing film on price alone. Moisture gets in during storage and the product fails stability or customer complaints rise.
  • Skipping the validation package for pharma use. Documents are much harder to get from the factory after the machine has shipped.

After blister packing, strips usually go into cartons and shrink-wrapped bundles. See our guides to cartoning and end-of-line packaging machines and the shrink wrapping machine price in Bangladesh.

FAQ

What is the price of a blister packing machine in Bangladesh?
It depends on machine type, forming width, speed, the number of mould sets, feeder, coding, documentation, freight and duty. Send DE International your product sample details and we will quote a landed cost.

Which blister machine is best for a small pharmaceutical company in Bangladesh?
Most small pharma, herbal and nutraceutical plants start with a flat-plate Alu-PVC machine that can also run Alu-Alu if needed, with stainless contact parts and a full validation package.

What is the difference between Alu-PVC and Alu-Alu blister packing?
Alu-PVC forms a clear plastic pocket with heat; Alu-Alu cold-forms aluminium laminate. Alu-Alu protects much better against moisture and light, which helps moisture-sensitive tablets in humid weather.

Can one blister machine pack different tablet sizes?
Yes, by changing mould sets. Each blister layout needs its own forming, sealing and cutting tooling, so order the sets you need with the machine.

Who can source a blister packing machine from China for my factory?
DE International sources blister packing machines and moulds in China, checks them before shipment and delivers door-to-door. WhatsApp +880 1750-859967 or use our contact page.

Planning a packing line? See our services, our China sourcing and buying agent service, or browse machines in our shop. Also useful: powder, granule and tube filling machines. WhatsApp: +880 1750-859967.

Leave a Reply

Your email address will not be published. Required fields are marked *